In physics, it is often necessary to make certain assumptions to simplify a complicated problem to make it tractable. We might make assumptions about symmetry, say that a certain small value is essentially zero, talk about what happens when a certain value is infinity, or any of a host of other simplifications that would make a mathematician cringe and make a layman wonder how he can take our results seriously.
We often make light of this tendency by talking about spherical cows. Obviously, a spherical cow is a pretty ridiculous picture:
However, in certain situations, estimating the cow as a sphere with a characteristic radius might not be as ridiculous as it seems. For example, if the car were flying through the air (or standing in a strong wind, if flying spherical cows are too much for you to accept), the air resistance on a sphere the size of a cow would be a pretty accurate approximation.
But of course, the spherical cow is most useful as a metaphor for the approximation techniques we do use. So what are these simplificaton techniques? Read on to find out.
- Arguments from Symmetry
This sort of corresponds to the spherical cow, in that it’s much easier to think about (and write equations about) things that have nice symmetry, like a sphere, than something that has a strange shape, like a cow. A common example of this is in the application of Gauss’ Law. In theory, the Law should allow us to calculate the electric field due to any arbitrary distribution of electric charge. In practice, however, the math is incredibly difficult to solve except for certain cases where we can invoke a spherical, cylindrical, or planar symmetry. This is all fine when you’re doing textbook problems that begin “consider a uniform sphere of charge…”, but is such a symmetry argument really useful in practice?
It does, in fact, come in handy when solving real-world problems, something that I had direct experience with during my REU research at Indiana University in the summer of 2007. I was working on a computer program that was part of a simulation of the electric fields produced by the proton beam in a linear particle accelerator. In reality, a beam of protons is a collection of discrete charges distributed randomly across a certain cylindrical region. But to develop my program, I used the “Beer Can Model” of a proton beam: approximating it as a continuous cylinder of charge. I developed my method (which was a technique of removing numerical noise from the simulation) based upon this model. When we tested the method on data generated from a more realistic beam, the technique still worked. This showed that the symmetrical approximation that we made was valid.
- “This number is really small, so it goes away”
Everybody who’s taken any sort of math class knows that a statement like N+1 = N is simply ridiculous. Everyone, that is, except for the physicist. Let’s say that N is a really huge number, like if someone dumped an entire truckload of M&M’s in your driveway. If you turned your back on me to watch the truck drive away, and I threw another M&M in the pile while you weren’t looking, would you really notice? What if I snuck one while you were looking to the sky to thank God for this miracle? No, you’d really have no idea. So in this case, for all practical purposes, N+1 = N-1 = N. We make this approximation all the time in my statistical mechanics class, where N represents some astronomically huge number, like the number of water molecules in your glass.
This argument is probably one of the most commonly used in derivation of physics concepts. Besides adding and subtracting, you can say that a small number divided by a big number equals zero. Or that a big number divided by a small number is infinity. Or that the sine of a small angle is equal to the angle measure.
Of course, using this approximation judiciously is extremely important, and knowing when it’s valid to do so is as much of an art as a science. This is all a part of a physics education, as there is not really a way to sit down and say “here’s where you can make this argument, and here’s where you can’t.” Rather, it’s something that you gradually pick up over the years of watching your professors and and textbook authors make the argument.
- Higher-Order Terms Vanish
This is similar to the previous case, but in a slightly more abstract way. The argument basically goes that if a number is small (much smaller than 1), then its square will be tiny, and any terms involving this square can be thrown out. The same argument goes for products of two different but very small numbers.
This comes into play when you are working with expressions that involve differentials (the dx and dt stuff that you may remember from calculus). If, for example, you multiply two expressions containing differentials together, you would keep the terms having just one differential, but you would throw away anything involving dx^2, dt^2, or dx*dt. This is called the first-order approximation, and second-order will be more accurate, but sometimes that level of accuracy is not necessary. Some problems will have even higher-order terms that you may or may not have to calculate.
This also comes applies when approximating a function by a series. Many common functions can be expressed as series, but these series have infinitely many terms. Since we cannot possibly deal with an infinite number of terms, the higher order terms must be discarded.
- It’s on the order of…
This is the jargon that physicists use when we are doing really rough estimates. Often, you don’t care what the actual numerical value of something is, you just want to know whether it’s about a meter, a nanometer, or a kilometer. This gives us free license to be sloppy. Pi is equal to 3, or 1 if we really feel like it. We don’t have to remember whether the equation has a factor of 2 in it, or the exact values of constants, and we can feel free to make any of the other approximations as we see fit. These calculations are sometimes called “back of the envelope calculations,” since we might work them out on any scrap of paper lying around, as the answer will not be quite worth saving. This is not to say that the answer is unimportant, however, as the calculation can give us a conceptual understanding of how the system in question behaves.
The new blog Shores of the Dirac Sea has a nice list of how such approximations are called in the jargon of technical papers:
- “Toy model”: hopefully this model has something to do with the original problem that I couldn’t do.
- “This is a very rough approximation”: We are calling a spherical cow a spherical cow. If you are lucky the order of magnitude is right.
- “An approximation”: One can probably do better, but this is all I can do now.
- “To zero-th order”: This suggests that there is a systematic way to improve the calculation: these are called first order, second order, etc.
- “An uncontrolled approximation”: Something that seems to work even if I don’t know why.
- Setting Constants Equal to Unity
A trick that theorists often use is to set all their units equal to 1 (or unity, as they seem to like to call it, even though it’s pretty much just a fancy word for one). I’m not really sure how they get away with this (I think it has to do with how they define their units), but I guess I’ll find out eventually, since I intend to become a theorist. This isn’t quite in the same vein as the other methods of approximation, but it is a trick that physicists use to make our lives easier, which is really what making assumptions is all about.
Finally, if all else fails, just wave your hands, sketch a graph, or look at limiting cases where you know the answer must tend toward a certain value. Although I don’t think all the hand-waving in the world will persuade a farmer to take that spherical cow off of your hands.
Actually setting constants equal to unity gives exact results, just in different units. Think about the difference between miles per hour (mph) and kilometers per hour (kph). They are different numbers which represent exactly the same speed because the kilometer is defined differently from the mile.
What’s to stop me from defining a unit called the “zorg” which is equal to 299,792,458 meters? Then I could say that the speed of light is exactly one zorg per second. Why stop there? Why not just say that time can be measured in (zorg/c)? Then setting c = 1, doesn’t make any difference.
You would of course have to change the units in your problem. But really, that’s no big deal. You can chug away under this new unit system until you get an answer and then, if you know you’re looking for time, but the unit is in zorgs, you just multiply by 1/c, to get zorg/c, which was time.
In reality, physicists don’t use zorgs (shock!), the standard unit to measure things in is electron volts. Things tend to be figured out in units of energy, then depending on what you’re trying to figure out, you multiply by the correct powers of “c” and “hbar” until the units are restored.
Ah yes, higher order terms vanish. heh, I used to love that one when I did maths. a quick swipe of a grey pencil line and there was suddenly so much less to worry about. =D
The first comment is pretty much dead on with the hbar=c=1 thing. It works fine, and there is an even clearer way (to me) to see why. To define a system of units, you need to specify three things: a length, a time, and a mass. Now, note some things about hbar and c
hbar has dimensions of angular momentum, or mass * distance^2 / time
c has dimensions of, distance/time
now note something about these two: there is no way to combine them to get one of the three fundamental quantities by itself. Therefore, what I can do is specify one of the three (or some combination) and let the other two be defined “naturally” such that hbar and c are both 1.
Usually the unit we choose is that of energy (usually GeV, not always). Notice that if you take the other two and add energy, you can now form products in such a way to isolate mass, length and time as you please.
The nice thing about this is you can check your units without ever using any units by checking the “mass dimension”
Energy is your unit, so energy has mass dimension “1”
to get time, you take hbar/energy, so time (and length) have dimension “-1” (energy^-1)
velocity is dimensionless and always turns out to be v/c = beta
momentum has dimensions energy/c, so it has mass dimension 1
and so on and so forth.
So you might get a length at the end of the day measured in (GeV)^-1, which is fine, and some theorists understand by itself (impressive to me) or you can divide it by hbar*c in any units you want to get an answer in any other units you need. Useful is hbar*c~197.3 MeV*fm
“This number is really small, so it goes away”
This sort of analysis does have a name, and it’s far from limited to physics. Actually, physicists are possibly not even the most prolific users of it. It’s called big-o notation: http://en.wikipedia.org/wiki/Big_O_notation
BTW, this was quite a nice treatment. Thank you.
The reason for “unity” is that “one” can lead to confusing or ambiguous parsing, since the word also functions as the indefinite article, and even worse, as the generic pronoun that one uses too much in scientific writing.
With havin so much content and articles do you ever run into any issues of
plagorism or copyright infringement? My blog has
a lot of unique content I’ve either written myself or outsourced but it seems a lot of it is popping it up all over the internet without my authorization. Do you know any techniques to help stop content from being ripped off? I’d definitely appreciate it.
Hi! I could have sworn I’ve been to your blog before but after looking at a few of the posts I realized it’s new to me.
Regardless, I’m certainly happy I came across it and I’ll be book-marking it and checking back regularly!
Hi there just wanted to give you a quick heads up. The words in your content seem to be running
off the screen in Safari. I’m not sure if this is a format issue or something to do with web browser compatibility but I figured I’d post to let you
know. The design and style look great though! Hope
you get the problem fixed soon. Kudos
I am sure this article has touched all the internet visitors, its really really
nice post on building up new weblog.
http://guidainternet.altervista.org/search.php?term=Enduros+Male+Enhancement+Free+Trial&search_in=title&sort_by=newest_first&search_type=links
Attractive section of content. I just stumbled upon your weblog and in accession capital to assert that I get actually enjoyed account your blog posts. Any way I’ll be subscribing to your feeds and even I achievement you access consistently quickly.
Nice post. I was checking continuously this blog
and I am impressed! Extremely helpful info particularly the last part :
) I care for such info much. I was looking for this
certain information for a long time. Thank you and best of luck.
Write more, thats all I have to say. Literally,
it seems as though you relied on the video to make your point.
You obviously know what youre talking about, why throw
away your intelligence on just posting videos to your site
when you could be giving us something enlightening to read?
Thanks , I’ve just been searching for info approximately this subject for a while and yours is the best I’ve discovered till now.
But, what concerning the bottom line? Are you positive about the supply?
Aren’t you savvy and also established to be all over the place.
The psychologically diseased person must tease to others and or
this issue never let to patient to do anything as per the brain.
If the structure of an organisation is rigidly hierarchical, knowledge sharing becomes much
harder to practice, than if the organisation is made up from a
number of autonomous units in an independently connected network.
Which false assumptions have large potential consequences.
This just made his passion stronger for everything scooter.
Does it seem that others notice improvements in your skin before you do.
20 percent of clients cause 80 percent of the problems. It becomes equally important that the work is sent to only that firm with the requisite resources and personnel to undertake such a tough job and do it with a lot of conviction. Business organizations will not survive the Internet era unless they adapt to the new realities of doing business.
hi!,I love your writing very so much! share we be in contact more approximately your article on AOL?
I need a specialist in this area to unravel my problem.
May be that is you! Taking a look ahead to see you.
This blog was… how do I say it? Relevant to me!!!
Finally I have found something which helped me. Kudos!
You post very interesting articles here. Your website deserves much bigger audience.
It can go viral if you give it initial boost, i know useful service that can help you, just type
in google: svetsern traffic tips